***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 6:50 pm


Board index » Official Resonator Forum

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 2
  [ 26 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
weslewis
 Post subject: Resonator build
PostPosted: Wed Jan 23, 2013 3:51 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Getting jigged up for my up coming and first resonator build....Cone finally shipped from Beard, backordered for a month, and not having a circle cutter to use I put this together this afternoon...works good...based off one I saw somewhere online..
1/4 inch mdf, 1/4inch draw bolt hardware ,home depot, and rigid trimmer...works good..will post pics as I proceed... I do this as a hobby so it could take some time Eat Drink Eat Drink


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
Don Williams
 Post subject: Re: Resonator build
PostPosted: Wed Jan 23, 2013 4:28 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
I will be watching with great interest.

What are you using for plans / design?

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."
Top
 Profile  
 
mtracz
 Post subject: Re: Resonator build
PostPosted: Wed Jan 23, 2013 9:04 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Mon Jan 28, 2008 11:24 am
Posts: 164
Location: Ohio
First name: Mike
Last Name: Tracz
Me too!

_Mike

_________________
_Mike Tracz
MCT Guitars
https://www.instagram.com/mustcreatethings/
https://www.youtube.com/mustcreatethings
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Wed Jan 23, 2013 11:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
It will be based on my MK5 design...which is a 12 fret cutaway .. Bubinga back and sides , with a "a" Sitka top...beard spider bridge and cone, along with a gold cover , sound ports and tailpiece all well made in south korea!!!!...a Resoacoustic!! wow7-eyes any suggestions , ideas along the way will be appreciated...haven't decided yet about the top although I would like to use a radiused top if possible to help with the neck angle... idunno


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
Don Williams
 Post subject: Re: Resonator build
PostPosted: Sat Jan 26, 2013 7:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Dec 27, 2004 11:25 pm
Posts: 7202
Location: United States
I would certainly consider checking into the designs of Tim Scheerhorn. His internal construction is fairly unique, and is what I based my design on.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Sat Jan 26, 2013 9:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
I was thinking on something along the lines of a brace with arms that connects to the neck block , heel and sides, and radiused , the sides will have solid linings to link to .... idunno subject to change!!!!!!!!!! wow7-eyes

_________________
MK5acoustics.com
Top
 Profile  
 
NightOwl
 Post subject: Re: Resonator build
PostPosted: Sat Jan 26, 2013 11:27 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Nov 04, 2012 12:10 pm
Posts: 76
First name: Britt
Last Name: Askew
State: North Carolina
Focus: Build
Status: Amateur
Looking forward to seeing this Eat Drink
Top
 Profile  
 
kfish
 Post subject: Re: Resonator build
PostPosted: Sun Jan 27, 2013 8:54 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 27, 2008 8:44 pm
Posts: 104
Location: Woodstock, Illinois
First name: Kent
Last Name: Fishburn
City: Woodstock
State: Illinois
Focus: Build
Status: Amateur
Quote:
.haven't decided yet about the top although I would like to use a radiused top if possible to help with the neck angle...


I don't see how a radiused top would work, as you need a flat top for the coverplate.
I sanded an angle into the upper bout to get my neck angle. I have a National El Trovador and it looks like National does the same. If I lay a straight edge across the top. the lower bout is flat, but the upper bout angles down, dropping off about 1/8" at the neck block.

Kent
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Tue Jan 29, 2013 9:40 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
If I lay the coverplate down on a radiused top it fits flush.., but what about recessing the plate into the top???? which would require recessing the cone slightly more.... I do see a possible break angle issue using a tail piece??? idunno doesn't seem to be a lot of information out there???
what about the thought of possibly using a pinless bridge instead of a tailpiece to compensate for the different break angle??????
beehive

_________________
MK5acoustics.com
Top
 Profile  
 
Mike Dotson
 Post subject: Re: Resonator build
PostPosted: Tue Jan 29, 2013 10:55 am 
Offline
Koa
Koa

Joined: Fri Dec 16, 2005 1:47 am
Posts: 504
Location: United States
The cover will conform to a 30' radius without any issues but the floor of the well needs to be flat. There's really no reason to arch the top, most builders just put a small wedge under the FB when they set the neck.

As to recessing the cover I've done them both ways and sitting flat on the top isn't really a big deal. Looks fine either way.

As to the tailpiece/break angle I think you're over-worrying this a bit. The break angle doesn't have to be very high.
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Tue Jan 29, 2013 2:34 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Another jig to radius main brace using my radius dish...I will rout everything out after gluing to the top piece which is some really stiff Sitka,,,thinned to .115


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Sun Feb 03, 2013 6:10 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Made some more progress


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Sun Feb 03, 2013 6:12 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
the stick used in the neck block glue up is for alignment only....

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Sun Feb 10, 2013 1:42 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Fitting the top....gluing UTB on a 70 foot caul to flatten fretboard area
sanding in radius to the rims..


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Mon Feb 11, 2013 8:40 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
Still winging it...having fun!!!!! wow7-eyes
Top is radiused to the standard 28 foot radius, the area under the fretboard extension has a 70 foot radiused brace to flatten the upper bout.
cover plate is recessed 3/64 into the top with the cone recessed another 1/4 inch which put the top of the spider flush with the lower part of the opening in the coverplate...all this gets my neck angle in the ball park... :shock:
My circle cutter has worked flawlessly so far!!!!!!!!!!! bliss


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Wed Feb 13, 2013 6:00 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
More progress!!! about to close the box then start on the neck, still toying with the idea of a wooden pinless bridge instead of the tail piece..


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
ZekeM
 Post subject: Resonator build
PostPosted: Mon Feb 18, 2013 8:31 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
Just stumbled across this. Very cool build. Looking good so far. What is the purpose of the dowels connecting the top and back?
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Mon Feb 18, 2013 8:37 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
support for the front of the cone brace and a place to attach a baffle If desired..This is my first Reso build so I am borrowing some design ideas from other reso builds pizza

_________________
MK5acoustics.com
Top
 Profile  
 
jethro16
 Post subject: Re: Resonator build
PostPosted: Wed Feb 20, 2013 5:49 pm 
Offline
Mahogany
Mahogany

Joined: Mon Apr 28, 2008 2:54 pm
Posts: 43
Location: Greensboro, NC
First name: Jeff
Last Name: Smith
Focus: Build
Status: Amateur
Looking great Wes!
Top
 Profile  
 
weslewis
 Post subject: Neck build
PostPosted: Mon Feb 25, 2013 7:36 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
some progress on the neck build and setting the angle...


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Mon Feb 25, 2013 7:39 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
sanding angle


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Mon Feb 25, 2013 7:43 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
cutting the tenon , Cumpiano style


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Mon Feb 25, 2013 7:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
drilling tenon


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
weslewis
 Post subject: Re: Resonator build
PostPosted: Mon Feb 25, 2013 7:50 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 10, 2010 11:40 am
Posts: 764
First name: wes
Last Name: Lewis
City: Garland
State: Tx.
Zip/Postal Code: 75044
Focus: Build
flossing heel for flush fit setting centerline..so far so good on the radiused top and the neck angle !!! bliss


You do not have the required permissions to view the files attached to this post.

_________________
MK5acoustics.com
Top
 Profile  
 
Mike Dotson
 Post subject: Re: Resonator build
PostPosted: Tue Feb 26, 2013 5:21 pm 
Offline
Koa
Koa

Joined: Fri Dec 16, 2005 1:47 am
Posts: 504
Location: United States
Very nice build!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 26 posts ]  Go to page 1, 2  Next

Board index » Official Resonator Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com